Cutting of Sheet Metal

Cutting of Sheet Metal

Cutting is part of every construction, it can be done in various ways depending on the material and their thickness.

The right choice of method is necessary to obtain the desired product, without reducing its metallurgical strength and quality.

CUTTING TECHNOLOGIES:

vertical_black_line

01

In 2004, our company invested in the new Laser cutting technology and began its collaboration with the German company Trumpf. In 2004 the first TruLaser CO2 machine with a 4000W source and 4000X2000mm machining table was installed, followed in 2007 by the purchase of the second Laser machine with a 3000X1500mm machining table.

In 2012, the third TruLaser CO2 machine was installed with a 6000W source and a 4000x2000mm machining table, which offered the company greater ability to process large thicknesses and a variety of materials. Our move to the new premises in 2021 was combined with the purchase of two more Laser machines of the new Fiber technology of the German House Trumpf, with processing tables of 6000x2500mm and 3000x1500mm with a processing power of 6000W.

Why choose
cutting with a laser technology machine:

High accuracy

Cutting quality

High cutting
speed

Small cutting width
(kerf)

Very small heat affected zone

Ability to cut a variety of materials

High accuracy

Cutting quality

High cutting
speed

Small cutting width
(kerf)

Very small heat affected zone

Ability to cut
a variety of materials

The materials we can process for you with the Laser machine:

  • Plain structural steel
  • Galvanized steel
  • DCP steel
  • Stainless steel
  • Refractory steel
  • Aluminum
  • Copper
  • Titanium
  • Maximum dimension of cutting sheet: 6000X2500mm
  • Maximum thickness depending on the material:
  • Simple structural steel: 30mm
  • Stainless steel: 30mm
  • Aluminum: 25mm
  • Copper: 10mm
  • Brass: 10mm
  • Titanium: 6mm
vertical_black_line

02

CUTTING TECHNOLOGY
PLASMA AND OXYGEN

The company has two pantographs with multiple oxygen cutting torches, as well as a Plasma technology CNC cutting machine with a high definition generator. In 2017, a hybrid machine of multiple machining technologies from the well-known company Microstep was added to the workforce.

The machine is capable of cut a pipe up to 500mm in diameter with Plasma technology with a high definition generator, oxygen cutting technology, bevel cutting, drilling and pipe cutting.

What hybrid technology excels at:

Combining multiple machining technologies in the same piece

High precision and cutting quality, especially in larger thicknesses

Ability to cut in degrees

Ability to punch or mark sheet metal

Ability to cut pipe with Plasma technology

  • Simple Structural Steel (Plasma + Oxygen)
  • Stainless Steel (Plasma)
  • Hardox® (Plasma + Oxygen)
  • Maximum cutting sheet dimensions: 12000 x 3500 mm
  • Maximum cutting thickness depending on the technology:
  • Plasma: 70mm
  • Oxygen: 250mm
  • Pipe: 1500mm
  • Drilling: 40mm
vertical_black_line

03

CUTTING TECHNOLOGY
WITH SAW RIBBONS

Our company has 5 cutting machines with saw ribbon capable of cutting from Φ350 to Φ850.

Elongated products we process:

ELONGATED

  • SQUARE SECTIONS 6 to 150mm
  • HEXAGONS – ROUND SECTION Φ8-250mm
    Grades S235-JR, S275-JR, Lead, Caliber, CK45, CK60
  • EQUILATERAL CORNER SECTIONS 15X3 to 200X20mm
  • UNEQUILATERAL CORNER SECTIONS 40X20X3 to 200X150X12mm
  • SQUARE PIPES 30X30X2 up to 500x500x20mm
  • RECTANGULAR SECTIONS 40X40X2 to 600X400X20mm
    Grades: S235-JR, S275-JO, S355-J2
  • CONSTRUCTION PIPES
  • HOT ROLLING Φ16X0.9 to Φ508X10
    Grades: S235-JR, S275-JR, S275-JO, S355-JR, S355-JO, S355-J2
  • HOT DIP GALVANIZED Φ21Χ3 to Φ168Χ4
  • PRE-GALVANISED Φ21X1.5 to Φ114X2
    Grades: S235-JR, S275-JR, S275-JO, S355-JR, S355-JO, S355-J2
  • CRANE TRACKS OR IRON TRACKS
Skip to content